AUDI MAPS UPDATE SPECIALISTS
Audi MMI navigation map updates, GPS map database updates and supported MMI software updates in Melbourne.
Is your Audi navigation system showing old roads, missing streets, outdated speed information or Points of Interest that no longer exist? Melbourne Euro provides specialist Audi Navigation Map Update services in Melbourne for supported Audi MMI and factory navigation systems.
We can update compatible Audi navigation systems with the latest available map data for the particular MMI/navigation system, helping keep your factory navigation useful without replacing the original infotainment system.
Depending on your Audi and MMI generation, our service can include:
✓ Australian map database updates
✓ Updated roads and route information
✓ Updated Points of Interest (POI)
✓ Navigation database installation
AUDI MMI • NAVIGATION • GPS MAPS • SOFTWARE • FIRMWARE • ODIS
HOW DO I KNOW IF MY AUDI MAPS ARE OUTDATED?
Common signs of an outdated Audi navigation database include:
- New roads missing from the map
- Recently constructed freeways not displayed
- Navigation directing you through old routes
- Missing new suburbs or streets
- Incorrect road layouts
- Outdated Points of Interest
- Businesses shown that no longer exist
- New destinations that cannot be found
- Older navigation database/version displayed in the MMI
- Vehicle appearing to travel somewhere other than the displayed road
If the vehicle position itself is incorrect, however, the problem may not simply be outdated maps. A GPS antenna, navigation module, MMI system or another fault may need diagnosis. Melbourne Euro can determine whether your Audi needs a map update or an actual navigation-system repair.
AUDI MMI NAVIGATION MAP UPDATE
Audi has used several generations of MMI — Multi Media Interface — and navigation systems across its model range.
The update process is not identical for every Audi. Depending on the model and generation, navigation data may be stored or installed using different media, storage systems and update procedures. Before carrying out an update, Melbourne Euro identifies the vehicle’s:
- Audi model
- Model year
- MMI generation
- Existing navigation database
- Available compatible update
This is important because navigation files intended for one MMI generation should not simply be installed onto another system.
AUDI AUSTRALIA NAVIGATION MAP UPDATE
Melbourne Euro can install the latest compatible Australian navigation map database available for supported Audi navigation systems. Updated map data can include newer information relating to:
- Australian roads
- Highways and freeways
- Intersections
- Road layouts
- Addresses
- Suburbs
- Route data
- Points of Interest
- Navigation destinations
The exact database content depends on the Audi navigation platform and the map version available for that system.
WHAT VERSION ARE MY AUDI NAVIGATION MAPS?
The installed map and software information can generally be identified through the Audi MMI system.
Depending on the MMI generation, the vehicle may display information relating to:
Software Version • Navigation Database • Media Version • Train Version • Map Version
If you’re unsure what system or map version your Audi currently has, Melbourne Euro can identify it for you.
This also allows us to determine what update path is available for the vehicle.
AUDI MMI & INFORMATION ELECTRONICS
Modern Audi navigation is integrated with the vehicle’s wider infotainment and electronic architecture.
Depending on the Audi generation, navigation operation can interact with:
- MMI
- Information electronics
- Virtual Cockpit
- GPS antenna
- Online services
- Other vehicle control modules
This is why Melbourne Euro approaches Audi navigation as an integrated vehicle system, rather than simply loading map files.
AUDI NAVIGATION AFTER MMI REPLACEMENT
If an Audi MMI or information-electronics module has been replaced, updating the maps may only be one part of the job. Depending on the vehicle and replacement component, additional work can include:
- Component Protection adaptation
- Module coding
- SVM programming
- Parameterisation
Melbourne Euro specialises in Audi control-module programming and ODIS diagnostics, allowing us to assist with the complete replacement process.
AUDI MODELS WE SUPPORT
Audi navigation map updates may be available for supported factory navigation systems fitted to models including:
Audi A1
Audi A4
Audi A5
Audi A6
Audi A7
Audi A8
Audi Q3
Audi Q5
Audi Q7
Compatibility depends on the MMI/navigation generation fitted to the vehicle, not simply the Audi model. Contact us with your VIN or navigation/software version and we can determine what update options are available.
AUDI NAVIGATION MAP UPDATE FAQ
CAN YOU UPDATE MY AUDI NAVIGATION MAPS?
Yes. Melbourne Euro provides navigation map updates for supported Audi factory navigation and MMI systems.
DO YOU HAVE AUSTRALIAN AUDI MAP UPDATES?
We can install the latest compatible Australian navigation database available for supported Audi systems. Availability depends on the MMI/navigation generation fitted to the vehicle.
WILL A MAP UPDATE ADD NEW ROADS?
A newer map database can contain roads, routes, addresses and Points of Interest added or changed since the older database was released.
DOES A MAP UPDATE UPDATE THE GPS SATELLITE SYSTEM?
No. The GPS system determines the vehicle’s geographical position. A map update updates the navigation database that the vehicle uses to display roads and calculate routes.
IS AN AUDI MAP UPDATE THE SAME AS AN MMI SOFTWARE UPDATE?
No. The map database contains navigation information, while the MMI firmware/software controls the infotainment system. Depending on the vehicle, one or both may require updating.
CAN YOU UPDATE MY AUDI MMI SOFTWARE?
For supported systems, Melbourne Euro can assess the installed software and determine whether an appropriate software or firmware update is available.
MY AUDI GPS SHOWS THE WRONG LOCATION. DO I NEED NEW MAPS?
Not necessarily. If the vehicle’s actual position is incorrect, there may be a GPS antenna, navigation module, software or other system fault. We can diagnose the system before recommending an update.
CAN YOU UPDATE AN OLDER AUDI NAVIGATION SYSTEM?
Potentially, yes. It depends on the navigation platform and whether compatible map data is still available for that generation.
HOW DO I FIND MY AUDI MAP VERSION?
The software/navigation version can usually be identified through the MMI system. If you’re unsure where to find it, Melbourne Euro can identify the installed system and version for you.
DO YOU UPDATE AUDI MMI AFTER A REPLACEMENT UNIT HAS BEEN INSTALLED?
Yes, we can assist with supported replacement MMI and information-electronics modules. Depending on the vehicle, this may also require Component Protection, coding, programming, configuration and navigation setup.
AUDI NAVIGATION MAP UPDATE MELBOURNE
If your Audi is still navigating with old roads, outdated destinations or an older Australian map database, Melbourne Euro can check your MMI/navigation system and determine what updates are available.
MELBOURNE EURO AUDI NAVIGATION SERVICES
✓ Latest compatible Audi navigation maps
✓ Australian map database updates
✓ Audi MMI navigation updates
✓ Updated roads & Points of Interest
✓ MMI software & firmware services
✓ Navigation fault diagnosis
✓ Audi ODIS diagnostics
✓ ODIS online programming
✓ MMI & information electronics specialists
MELBOURNE EURO
4/23 Cooper Street, Campbellfield VIC 3061
1800 635 387
Contact Melbourne Euro with your Audi model, year, VIN and current MMI/navigation version to confirm the latest compatible map update available for your vehicle.
