MERCEDES-BENZ ADVANCED DIAGNOSTICS AT MELBOURNE EURO – $180 FIXED COST
Using specialist diagnostic equipment and manufacturer-level systems, we can diagnose faults across the engine, transmission, safety systems, suspension, emissions systems, infotainment and vehicle electronics.
We go beyond simply reading and clearing fault codes. Our aim is to identify the underlying cause of the problem and advise you on the correct next step.
WHAT SYSTEMS DO WE DIAGNOSE?
Our Mercedes-Benz diagnostic service can assess:
- Engine & ECU – engine light, misfires, sensors, fuel, boost and performance faults
- Transmission – 7G-Tronic, 9G-Tronic, limp mode, harsh shifting and gearbox faults
- ABS & ESP – braking, stability control and wheel-speed sensor faults
- SRS & Airbags – airbag, restraint and seat-system faults
- AIRMATIC Suspension – vehicle sitting low, suspension malfunction and compressor faults
- DPF & EGR – diesel particulate filter and exhaust-gas recirculation faults
- AdBlue / SCR / NOx – AdBlue warnings, NOx sensor faults and emissions-system problems
- Electrical Systems – battery, charging, SAM modules, CAN communication and wiring faults
- Climate Control – air conditioning, HVAC and electronic control faults
- Infotainment & Navigation – display, audio, communication and software-related faults
- TPMS – tyre pressure monitoring and sensor faults
COMMON MERCEDES-BENZ FAULTS WE DIAGNOSE
Customers often come to us with symptoms such as:
- Check engine light
- Mercedes in limp mode
- Transmission warning
- Harsh or delayed gear changes
- ABS / ESP warning
- SRS / Airbag warning
- AIRMATIC suspension malfunction
- AdBlue warning or restart countdown
- DPF warning
- NOx sensor fault
- Loss of power
- Engine misfire
- Electrical system faults
- Multiple warning lights
COMMON MERCEDES FAULT CODES
Some commonly searched fault codes include:
ENGINE / BOOST / MISFIRE
P0299 • P0300 • P0301 • P0302 • P0303 • P0304
TRANSMISSION
P0717 • P0722 • P0730 • P2767 • P2768
DPF / DIESEL
P2002 • P242F • P2453 • P2463
ADBLUE / SCR / NOx
P20E8 • P204F • P2200 • P2201 • P229F
A fault code is only a starting point.
The code does not always mean the component named in the description has failed.
For example, a P0299 under boost fault can be caused by a boost leak, actuator, sensor, wiring issue or turbocharger problem.
Correct diagnosis is always required before replacing parts, hence why we spend 90% of our time diagnosing and identifying the problem and 10% in repairs!
DEALERSHIP-LEVEL DIAGNOSTIC CAPABILITY
Melbourne Euro uses specialist Mercedes-Benz diagnostic equipment together with professional European vehicle diagnostic systems.
Depending on the fault, we can access:
- Manufacturer-specific fault codes
- Live data
- Control-module information
- Sensor values
- Adaptation data
- Communication faults
- Software information
- System status
This gives us significantly more information than a basic generic OBD scanner.
WHAT DOES THE $180 DIAGNOSTIC INCLUDE?
Our $180 fixed-cost diagnostic service can include:
✓ Full vehicle diagnostic scan
✓ Manufacturer-specific fault-code analysis
✓ Relevant live-data checks
✓ Investigation of the reported fault
✓ Identification of the likely cause
✓ Clear recommendations for the next step
If the fault requires additional dismantling, extended testing or specialised investigation, we will discuss this with you before proceeding.
WHY CHOOSE MELBOURNE EURO?
Melbourne Euro specialises in European vehicle diagnostics and repairs.
Our Mercedes-Benz diagnostic capability includes:
✓ Engine & ECU diagnostics
✓ 7G-Tronic & 9G-Tronic diagnostics
✓ ABS, ESP & SRS
✓ AIRMATIC suspension
✓ DPF, EGR & AdBlue
✓ NOx sensor faults
✓ Electrical & SAM module faults
✓ Infotainment & control modules
We don’t just give you a fault-code printout. We aim to find out what is actually wrong with the vehicle.
Book your Mercedes-Benz diagnostic assessment today.
IF WE CAN’T FIND THE PROBLEM, YOU DON’T PAY!
