Is your Audi transmission slipping, shuddering, jerking, losing gears or displaying a gearbox warning?
Melbourne Euro specialises in Audi transmission rebuilds, gearbox repairs, diagnostics and servicing for a wide range of Audi models and transmission types.
Transmission problems can be difficult to diagnose correctly. Before recommending a rebuild or replacement, we diagnose the transmission to determine whether the problem is mechanical, hydraulic, electronic or related to the mechatronic system.
AUDI TRANSMISSION REBUILD SERVICES
When internal transmission components become worn or damaged, a complete or partial Audi transmission rebuild may be required.
Depending on the transmission and fault, a rebuild may involve:
- Transmission removal and disassembly
- Internal transmission inspection
- Clutch replacement
- Bearing replacement
- Seal and gasket replacement
- Gear and shaft inspection
- Mechatronic inspection and repair
- Valve body inspection and repair
- Transmission fluid and filter replacement
- Reassembly and installation
- Transmission coding and adaptation where required
- Road testing and final diagnostics
The exact repair depends on the Audi model, transmission type and condition of the gearbox.
COMMON AUDI TRANSMISSION PROBLEMS
Audi transmissions can develop mechanical, hydraulic and electronic problems as components wear or faults develop.
Common symptoms include:
- Transmission slipping
- Shuddering or vibration
- Jerking when taking off
- Harsh or rough gear changes
- Delayed engagement into Drive or Reverse
- Loss of forward or reverse gears
- Transmission stuck in one gear
- Gearbox warning on the dashboard
- Flashing PRNDS
- Transmission limp mode
- RPM increasing without normal acceleration
- Clunking or unusual gearbox noises
- Transmission fluid leaks
- Vehicle won’t move when Drive or Reverse is selected
If your Audi is experiencing any of these symptoms, diagnosing the cause before replacing the transmission can help determine the most appropriate repair.
AUDI S TRONIC & DSG TRANSMISSION REPAIR
Audi S tronic dual-clutch transmissions combine electronically controlled mechatronics with mechanical gearbox and clutch components.
Problems can develop within the:
- Clutch packs
- Mechatronic unit
- Hydraulic system
- Transmission Control Module (TCU)
- Gear selectors
- Bearings
- Internal gears and shafts
- Sensors and actuators
Melbourne Euro provides Audi S tronic diagnostics, repairs and transmission rebuilds depending on the gearbox and fault.
We work with Audi dual-clutch transmissions including applicable DQ200, DQ250, DQ381 and DQ500 applications.
AUDI MECHATRONIC REPAIR & DIAGNOSTICS
The mechatronic unit controls many of the hydraulic and electronic functions within Audi S-tronic and DSG transmissions.
A mechatronic problem can cause symptoms such as:
- Gearbox warning messages
- Flashing PRNDS
- Loss of gears
- Harsh gear changes
- Delayed engagement
- Failure to select Drive or Reverse
- Transmission limp mode
A gearbox fault doesn’t automatically mean the entire transmission requires replacement.
We diagnose the mechatronic, clutch and internal transmission systems to determine which component is responsible before recommending repairs.
AUDI AUTOMATIC TRANSMISSION REPAIR
Audi vehicles also use conventional automatic transmissions across various models and generations.
Depending on the vehicle, problems may involve the:
- Torque converter
- Valve body
- Internal clutch packs
- Hydraulic system
- Solenoids
- Transmission Control Module
- Internal gears and bearings
Melbourne Euro provides Audi automatic transmission diagnostics, repairs and rebuilds based on the transmission fitted to the vehicle.
AUDI TRANSMISSION DIAGNOSTICS
Accurate diagnosis is an important first step before carrying out an expensive gearbox repair or rebuild.
Our Audi transmission diagnosis can include:
- Full transmission fault-code scan
- Transmission live-data analysis
- Clutch and adaptation value checks
- Mechatronic and hydraulic system assessment
- Transmission fluid condition and leak inspection
- Road testing where appropriate
- Mechanical inspection where required
- Determining whether repair, rebuild or replacement is the appropriate option
Melbourne Euro uses specialist Audi diagnostic equipment including ODIS and VCDS to investigate transmission faults and perform supported programming, coding, basic settings and adaptations where required.
AUDI TRANSMISSION SERVICE
Regular Audi transmission servicing can help maintain correct gearbox operation and identify developing problems before they become more serious.
Depending on the transmission, servicing may include:
- Transmission fluid replacement
- Transmission filter replacement
- Sump gasket or seal replacement
- Leak inspection
- Diagnostic scan
- Adaptation checks
- Basic settings where required
- Road test and transmission operation check
Transmission service requirements vary between different Audi gearbox types, so the correct fluid, procedure and service interval should be determined for the transmission fitted to your vehicle.
AUDI TRANSMISSION REBUILD OR REPLACEMENT?
Not every faulty Audi transmission needs to be completely replaced.
Depending on the diagnosis and internal condition, possible solutions can include:
- Transmission servicing
- Mechatronic repair
- Valve body repair
- Clutch replacement
- Internal gearbox repair
- Transmission rebuilds
- Replacement transmission
We assess the transmission first and recommend the repair option appropriate to the diagnosed fault and condition of the gearbox.
BOOK YOUR AUDI TRANSMISSION REBUILD IN TODAY
If your Audi transmission is slipping, shuddering, jerking, losing gears or displaying a gearbox warning, have the fault properly diagnosed before replacing the complete transmission.
Contact Melbourne Euro today to arrange Audi transmission diagnostics, gearbox repair or transmission rebuild with very little hassle and an extra smooth drive!