Free OBD Diagnostic for Audi, BMW, Mercedes-Benz, Volkswagen, Porsche, Lamborghini, Škoda, MINI, CUPRA, Bugatti, Land Rover, Range Rover, Volvo, Bentley and Maserati
Not sure why your European vehicle has suddenly displayed an engine light, transmission warning, ABS fault or another dashboard message?
Melbourne Euro offers new customers a FREE initial electronic diagnostic scan to help identify which vehicle systems are reporting faults and determine the appropriate next step.
Our Campbellfield workshop specialises in European vehicles and uses advanced manufacturer-specific and specialist diagnostic equipment across the brands we support.
The initial scan can retrieve stored fault codes and provide useful information about where a problem may be occurring.
Free Initial Diagnostic Scan – New Customers Only
Book online or call Melbourne Euro on 1800 635 387.
What Does the Free Diagnostic Scan Include?
Modern European vehicles contain numerous electronic control modules monitoring and controlling different parts of the vehicle.
Our initial diagnostic scan can check applicable systems for stored fault codes associated with:
- Engine management
- Automatic transmission
- DSG, S tronic and PDK systems
- ABS and stability control
- Airbag and safety systems
- Battery and charging management
- Electronic steering
- Suspension systems
- AWD and drivetrain systems
- Climate control
- Body and comfort electronics
- Infotainment systems
- Sensors and control modules
After scanning the vehicle, we’ll explain the relevant fault codes detected and advise whether further diagnosis or repair is recommended.
A Fault Code Isn’t Always the Faulty Part
This is important.
A diagnostic trouble code doesn’t necessarily tell you which component should be replaced.
For example, a fault code relating to a sensor could potentially be caused by the sensor itself, wiring, electrical supply, another component or a mechanical condition affecting the sensor’s readings.
That’s why Melbourne Euro distinguishes between a diagnostic scan and advanced fault diagnosis.
The free initial scan helps establish a starting point.
If determining the actual cause requires testing, measurements, wiring investigation, component testing, live-data analysis or mechanical inspection, we’ll explain the recommended diagnostic process and any applicable cost before proceeding.
European Manufacturer-Specific Diagnostic Technology
Generic OBD scanners can provide useful basic information, but modern European vehicles often require considerably deeper diagnostic access.
Melbourne Euro has invested in manufacturer-specific and specialist European diagnostic technology for the vehicles we work on.
Our workshop capabilities include applicable systems such as:
- ODIS Service for supported Volkswagen Group vehicles
- Specialist VAG diagnostic technology
- Porsche PIWIS diagnostic capability
- Advanced European vehicle diagnostic platforms
- Control-module coding and programming capability
- Live vehicle data and system testing
- Manufacturer-specific service functions
This allows our technicians to move beyond simply reading a generic engine fault code when further investigation is required.
European Brands We Diagnose
Melbourne Euro provides diagnostic services across European passenger, prestige and performance vehicles, including applicable:
Audi | BMW | Mercedes-Benz | Volkswagen | Porsche | Lamborghini | Škoda | MINI | CUPRA | Land Rover | Range Rover | Volvo | Bentley | Maserati
Whether it’s an everyday Volkswagen, BMW or Mercedes-Benz or a performance vehicle such as an Audi RS, BMW M, Mercedes-AMG, Porsche or Lamborghini, modern fault diagnosis requires the correct equipment and an understanding of the vehicle’s systems.
Common Reasons Customers Book a Diagnostic Scan
You don’t need to know what’s wrong before bringing your vehicle to us.
Book an initial diagnostic scan if you’re experiencing:
- Check engine light
- EPC warning
- Transmission or gearbox warning
- ABS warning light
- Airbag warning
- Steering warning light
- Suspension warning
- AdBlue or emissions warning
- DPF warning
- Battery or charging warning
- Reduced power or limp mode
- Rough running
- Intermittent electrical problems
- Unexplained dashboard messages
- Multiple warning lights
We’ll start by seeing what the vehicle itself is reporting.
From Fault Code to Proper Diagnosis
If your free scan identifies a fault requiring further investigation, Melbourne Euro can continue with advanced diagnosis.
Depending on the problem, this can involve:
- Live-data analysis
- Electrical testing
- Wiring and circuit diagnosis
- Sensor testing
- Mechanical inspection
- Pressure and vacuum testing
- Component actuation and functional testing
- Communication-network diagnosis
- Manufacturer-specific guided diagnostics
- Programming, coding or adaptation where applicable
This is where specialist diagnostic experience becomes particularly important.
Our objective isn’t to clear the fault code and hope it doesn’t return. It’s to determine why the fault occurred and identify the correct repair.
Honest Diagnosis. No Obligation to Repair.
The free initial diagnostic scan is designed to give new Melbourne Euro customers a useful first step toward understanding their vehicle.
If further diagnosis or repair is required:
- We’ll explain what the scan has identified.
- We’ll tell you what further investigation is recommended.
- Any chargeable diagnostic work will be discussed with you first.
- Repairs will be quoted separately.
- No additional repair work proceeds without your approval.
You’re not obligated to have the subsequent repair completed simply because we scanned your vehicle.
Free Diagnostic Scan for New Customers
Our free initial diagnostic scan is available to first-time Melbourne Euro customers.
It is intended as an initial electronic fault scan and assessment.
Please note: The free scan does not include extended fault-finding, dismantling, electrical testing, mechanical testing, programming, coding or other labour-intensive diagnostic procedures. Where further diagnosis is necessary, we’ll explain the recommended work and applicable cost before proceeding.
This distinction allows us to offer new customers a genuinely useful starting point without pretending that every vehicle fault can be diagnosed simply by plugging in a scan tool.
Why Choose Melbourne Euro for European Car Diagnostics?
Melbourne Euro is more than a workshop with an OBD scanner.
Our Campbellfield facility combines:
- European vehicle specialisation
- Manufacturer-specific diagnostic capability
- Advanced electronic fault diagnosis
- Mechanical and auto-electrical expertise
- Programming and coding capability
- Transmission and mechatronic expertise
- Transparent recommendations
- In-house repair capability
That means if the diagnostic scan identifies a mechanical, electrical, transmission, cooling, steering, suspension or programming-related problem, our workshop can usually continue the investigation and repair without sending the vehicle elsewhere.
Book Your Free Diagnostic Scan
Have a warning light or unexplained fault?
Start with a FREE initial diagnostic scan for new Melbourne Euro customers.
Engine | Transmission | ABS | Airbag | Steering | Suspension | Electrical | Battery | DPF | AdBlue | Drivetrain | Electronic Faults
Book online or call 1800 635 387.
Melbourne Euro – European Vehicle Specialists
4/23 Cooper Street, Campbellfield VIC 3061
New customers only. Free offer applies to the initial electronic diagnostic scan. Additional diagnostic investigation and repairs are quoted separately where required.